|
|
|
National Stock Number:
5905-01-103-3233
Federal Supply Class:
5905
National Item Identification Number:
011033233
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 0377396 | D0894 | ROHDE & SCHWARZ GMBH & CO. KOMMANDITGESELLSCHAFT | | 16775165-010 | 28009 | SYPRIS ELECTRONICS, LLC | | 2100-3103 | 28480 | HEWLETT-PACKARD COMPANY | | 3006P-1-103 | 32997 | BOURNS INC | | 267880 | 89536 | FLUKE CORP | | 3811P-1-103 | 96791 | BUNKER RAMO CORP AMPHENOL CONTROLS DIV | | 719-006-103 | 17903 | ANDREW SCICOMM INC | | 89PR-10K | 73138 | BI TECHNOLOGIES CORPORATION | | 961-10K | 75042 | TRW INC TRW ELECTRONIC COMPONENTS IRC FIXED RESISTORS PHILADELPHIA DIV | | 41000450-010 | 96238 | DNE TECHNOLOGIES, INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | BODY LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | BODY WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 5.00 INCH-OUNCES | | MOUNTING METHOD | TERMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.095 INCHES NOMINAL | | SHAFT LENGTH | 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | SPECIFICATION/STANDARD DATA | 96238-41000450 MANUFACTURERS SOURCE CONTROL | | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS | | TERMINAL LENGTH | 0.165 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 3 PIN |
|
|