5905-01-088-6638 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5840-01-088-6642 PROCESSOR,TARGET LOCATION DATA

National Stock Number:
5905-01-088-6641

Federal Supply Class:
5905

National Item Identification Number:
010886641

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
200FL1-21708815HONEYWELL INTERNATIONAL INC
32C1-251119176SERVO INSTRUMENT CORPORATION


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION350.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS SINGLE SECTION
ACTUATOR TYPEDOUBLE ENDED SHAFT
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY DIAMETER2.000 INCHES NOMINAL
BODY LENGTH0.631 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FEATURES PROVIDEDPRESSURE MOUNTED TAP
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION ABSOLUTE LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.10 TO 0.10 SINGLE SECTION
LATERAL RUNOUT0.002 INCHES
OVERALL DIAMETER2.330 INCHES MAXIMUM
OVERALL LENGTH2.996 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE1.00 INCH-OUNCES
MAXIMUM STARTING TORQUE1.50 INCH-OUNCES
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION0.1
MOUNTING LIP DEPTH0.0930 INCHES NOMINAL
MOUNTING LIP DIAMETER2.0000 INCHES NOMINAL
MOUNTING METHODCLAMP RING(S)
PILOT DIAMETER RUNOUT0.00100 INCHES
PILOT DIAMETER1.8750 INCHES NOMINAL
PILOT LENGTH0.0620 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT-5.0 TO 5.0 -65 DEG CELSIUS SINGLE SECTION AND -5.0 TO 5.0 125 DEG CELSIUS SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT END PLAY0.00500 INCHES
SHAFT DIAMETER0.2497 INCHES MAXIMUM
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.002 INCHES
SHAFT STYLEROUND, SLOTTED
SHAFT LENGTH0.625 INCHES NOMINAL
SPECIAL FEATURESFIXED WIRE WOUND RESISTOR INTERNALLY MOUNTED
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION175.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-0.25 TO 0.25 DEG ANGULAR ROTATION SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY3 TURRET
UNDERCUT DIAMETER1.875 INCHES NOMINAL
UNDERCUT WIDTH0.0800 INCHES MINIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us