5905-01-035-7543, RESISTOR,VARIABLE,WIRE WOUND,PRE

4730-01-035-7544 ADAPTER,STRAIGHT,PIPE TO TUBE

National Stock Number:
5905-01-035-7543

Federal Supply Class:
5905

National Item Identification Number:
010357543

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.

Manufacturer Information:

140-1-7-103	02111	VISHAY SPRAGUE INC
140-1-7-103	C7407	IV-ELECTRONIC KLAUS VESPERMANN KG
16578	F2181	GDI SIMULATION
16578	K8564	DORAND ELECTRONICS CO LTD

Techincal Specification:

BODY DIAMETER	0.495 INCHES MINIMUM AND
	0.505 INCHES MAXIMUM
BODY LENGTH	0.300 INCHES MINIMUM AND
	0.310 INCHES MAXIMUM
MOUNTING BUSHING LENGTH	0.297 INCHES MINIMUM AND
	0.327 INCHES MAXIMUM
ACTUATOR TYPE	SINGLE SHAFT
SHAFT STYLE	ROUND
SHAFT DIAMETER	0.1248 INCHES MINIMUM AND
	0.1251 INCHES MAXIMUM
SHAFT LENGTH	0.690 INCHES MINIMUM AND
	0.710 INCHES MAXIMUM
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	330.0 NOMINAL
ACTUATOR TRAVEL CONTROL FEATURE	STOPS
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	320.0 NOMINAL
NONTURN DEVICE LOCATION	AT 6 OCLOCK
NONTURN DEVICE RADIUS	0.182 INCHES MINIMUM AND
	0.192 INCHES MAXIMUM
MOUNTING METHOD	STANDARD BUSHING
SCREW THREAD SERIES DESIGNATOR	UNEF
SCREW THREAD DIAMETER	0.250 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH	32.0
TERMINAL TYPE AND QUANTITY	4 TURRET
TERMINAL LOCATION	REAR END
RELIABILITY INDICATOR	NOT ESTABLISHED
CUBIC MEASURE	0.060 CUBIC INCHES
SECTION QUANTITY	1
ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR
FUNCTION CONFORMITY TOLERANCE PER SECTION	-1.00 TO 1.00 SINGLE SECTION
SHAFT RUNOUT	0.002 INCHES
LATERAL RUNOUT	0.003 INCHES
PILOT DIAMETER RUNOUT	0.002 INCHES
SHAFT RADIAL PLAY	0.003 INCHES
SHAFT BEARING TYPE	BEARING
SHAFT END PLAY	0.006 INCHES
MAXIMUM STOP TORQUE	80.00 INCH-OUNCES
MAXIMUM STARTING TORQUE	12.00 INCH-OUNCES
MAXIMUM RUNNING TORQUE	12.00 INCH-OUNCES
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-20.0 TO 20.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
FIXED TAP QUANTITY PER SECTION	1 SINGLE SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS	5000.0 SINGLE SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION	150.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION	-5.0 TO 5.0 OHMS SINGLE SECTION
BODY STYLE	CYLINDRICAL BUSHING MOUNTED

Click here to Register for Free 30-day Trial