|
|
|
National Stock Number:
5905-01-024-0377
Federal Supply Class:
5905
National Item Identification Number:
010240377
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 755090A0031-8 | 87990 | QUARTERMASTER GENERAL | | SLYRNEAM1 | 04655 | GENERAL DYNAMICS MISSION SYSTEMS, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 1.000 KILOHMS LOWEST RESISTANCE VALUE | | 39.000 KILOHMS HIGHEST RESISTANCE VALUE | | 15.000 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE | | 22.000 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 3 LOWEST RESISTANCE VALUE | | 8 HIGHEST RESISTANCE VALUE | | 1 1ST INTERMEDIATE RESISTANCE VALUE | | 1 2ND INTERMEDIATE RESISTANCE VALUE | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | POWER DISSIPATION RATING IN WATTS | 1.500 TOTAL NETWORK | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | INCLOSURE METHOD | ENCAPSULATED | | STYLE DESIGNATOR | DUAL INLINE | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL QUANTITY | 16 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -250.0 TO 250.0 | | CUBIC MEASURE | 0.054 CUBIC INCHES | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK | | BODY LENGTH | 0.784 INCHES MINIMUM AND | | 0.876 INCHES MAXIMUM | | BODY WIDTH | 0.220 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM | | BODY HEIGHT | 0.200 INCHES MAXIMUM | | TERMINAL LENGTH | 0.125 INCHES MINIMUM AND | | 0.150 INCHES MAXIMUM | | TERMINAL WIDTH | 0.014 INCHES MINIMUM AND | | 0.200 INCHES MAXIMUM | | SPECIAL FEATURES | A NOTCH OR DOT SHALL BE LOCATED ADJACENT TO TERMINAL ONE |
|
|