5905-01-017-7233 RESISTOR,FIXED,FILM Index 5905-01-017-7237 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-017-7234

Federal Supply Class:
5905

National Item Identification Number:
010177234

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
2900P-20204454SENSOR SYSTEMS, L.L.C.
2900P20296791BUNKER RAMO CORP AMPHENOL CONTROLS DIV
966034-2194580HONEYWELL INTERNATIONAL INC.


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION8280.0 MINIMUM AND 13680.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION2.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECLUTCH
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
BEARING TYPEBEARING SHAFT
BODY HEIGHT0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
BODY LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES
BODY WIDTH0.230 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CUBIC MEASURE0.052 CUBIC INCHES
FEATURES PROVIDEDHUMIDITY PROOF
FRAGILITY FACTORMODERATELY RUGGED
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE10.00 INCH-OUNCES
MAXIMUM STARTING TORQUE10.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM
MOUNTING METHODUNTHREADED HOLE(S)
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
PRECIOUS MATERIAL AND LOCATIONTERMINALS GOLD
PRECIOUS MATERIALGOLD
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG8280.0 MINIMUM AND 13680.0 MAXIMUM
SECTION QUANTITY1
SHAFT LENGTH0.045 INCHES MAXIMUM
SHAFT DIAMETER0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
TERMINAL LOCATIONRIGHT ADJACENT SIDE TWO ROWS LOCATION NOT OTHERWISE SPECIFIED
TERMINAL LENGTH0.187 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY3 PIN


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us