5905-00-990-7484, RESISTOR,VARIABLE,WIRE WOUND,NON

5935-00-990-7482 CONNECTOR,RECEPTACLE,ELECTRICAL

5910-00-990-7487 CAPACITOR,FIXED,MICA DIELECTRIC

National Stock Number:
5905-00-990-7484

Federal Supply Class:
5905

National Item Identification Number:
009907484

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

300/605KP0RM5PCT	79318	MEGGITT NORTH HOLLYWOOD INC
381-1721-120	95105	ROCKWELL COLLINS, INC.
8983168-9	02734	LOCKHEED MARTIN CORPORATION
947147-1502	06481	NORTHROP GRUMMAN SYSTEMS CORPORATION
8983168-9	49671	LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION SYSTEMS AUTOMATED SPARES
418239-16	96214	RAYTHEON COMPANY
947147-1502	13973	LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION
MIL-PRF-27208/4	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-R-27208/4	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILR27208-4	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RT22C2L502	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	7200.0 MINIMUM AND 16200.0 MAXIMUM
SECTION QUANTITY	1
SHAFT DIAMETER	0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
SHAFT LENGTH	0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
SPECIFICATION/STANDARD DATA	81349-MIL-R-27208/4 GOVERNMENT SPECIFICATION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
TERMINAL LOCATION	REAR END
TERMINAL TYPE AND QUANTITY	3 WIRE LEAD
TEST DATA DOCUMENT	81349-MIL-R-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	7200.0 MINIMUM AND 16200.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	5.0 KILOHMS SINGLE SECTION
ACTUATOR TYPE	SINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURE	STOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BODY HEIGHT	0.500 INCHES NOMINAL
BODY LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES
BODY WIDTH	0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
CONTACT ARM ELECTRICAL OFF POSITION	FULLY CCW
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM
III OVERALL LENGTH	0.515 INCHES MINIMUM AND 0.555 INCHES MAXIMUM
III OVERALL HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
III OVERALL WIDTH	0.182 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION
PROPRIETARY CHARACTERISTICS	PACS
MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY	2
MOUNTING HOLE DIAMETER	0.093 INCHES NOMINAL
MOUNTING METHOD	UNTHREADED HOLE
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION

Click here to Register for Free 30-day Trial