5905-00-945-9527, RESISTOR,VARIABLE,WIRE WOUND,PRE

5905-00-945-9511 RESISTOR,FIXED,WIRE WOUND,NONIND

National Stock Number:
5905-00-945-9527

Federal Supply Class:
5905

National Item Identification Number:
009459527

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.

Manufacturer Information:

800-8810	02111	VISHAY SPRAGUE INC
800-8810	C7407	IV-ELECTRONIC KLAUS VESPERMANN KG
R080-601-2043	07421	L3HARRIS INTERSTATE ELECTRONICS CORPORATION
NL7603-1624-0	73138	BI TECHNOLOGIES CORPORATION

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	3600.0 MINIMUM
ELECTRICAL RESISTANCE PER SECTION	50.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
BODY DIAMETER	1.875 INCHES MAXIMUM
BODY LENGTH	2.250 INCHES MAXIMUM
BODY STYLE	CYLINDRICAL FRICTION MOUNTED
FEATURES PROVIDED	NONMETALLIC SHAFT
FIXED TAP QUANTITY PER SECTION	1 SINGLE SECTION
FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION GRAPH
FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.09 TO 0.09 SINGLE SECTION
OVERALL DIAMETER	2.375 INCHES NOMINAL
OVERALL LENGTH	2.875 INCHES NOMINAL
MAXIMUM STARTING TORQUE	1.20 INCH-OUNCES
MAXIMUM STOP TORQUE	1000.00 INCH-OUNCES
MOUNTING METHOD	CLAMP RING(S)
PILOT DIAMETER RUNOUT	0.002 INCHES
POWER DISSIPATION RATING PER SECTION IN WATTS	5.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-3.0 TO 3.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	3610.0 NOMINAL
SECTION QUANTITY	1
SHAFT END PLAY	0.005 INCHES
SHAFT DIAMETER	0.2494 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
SHAFT RADIAL PLAY	0.002 INCHES
SHAFT RUNOUT	0.002 INCHES
SHAFT STYLE	ROUND
SHAFT LENGTH	0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION	1805.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION	-10.0 TO 10.0 DEG ANGULAR ROTATION SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-30.0 TO 30.0 SINGLE SECTION
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY	4 TAB, SOLDER LUG
TEST DATA DOCUMENT	92220-R080-601-2043 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial