5910-00-932-5335 CAPACITOR,FIXED,PLASTIC DIELECTR Index 5950-00-932-5340 REACTOR

National Stock Number:
5905-00-932-5338

Federal Supply Class:
5905

National Item Identification Number:
009325338

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
60557-504454SENSOR SYSTEMS, L.L.C.
60557-510112GENERAL DYNAMICS MOTION CONTROL LLC
77C707833P5REVL03538LOCKHEED MARTIN CORPORATION
77C707833PT503538LOCKHEED MARTIN CORPORATION
77C707833PT598659DONEL SYSTEMS LLC


Techincal Specification:
SECTION QUANTITY1
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.10 TO 0.10 SINGLE SECTION
SHAFT RUNOUT0.001 INCHES
LATERAL RUNOUT0.002 INCHES
PILOT DIAMETER RUNOUT0.001 INCHES
SHAFT BEARING TYPEBALL
MAXIMUM STARTING TORQUE1.00 INCH-OUNCES
MAXIMUM RUNNING TORQUE1.00 INCH-OUNCES
POWER DISSIPATION RATING PER SECTION IN WATTS4.0 FREE AIR SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS2500.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-5.0 TO 5.0 OHMS SINGLE SECTION
BODY STYLECYLINDRICAL SERVO MOUNTED
PILOT DIAMETER1.8745 INCHES MINIMUM AND
1.8750 INCHES MAXIMUM
PILOT LENGTH0.0300 INCHES MINIMUM AND
0.0400 INCHES MAXIMUM
UNDERCUT DIAMETER1.875 INCHES NOMINAL
UNDERCUT WIDTH0.0730 INCHES NOMINAL
BODY DIAMETER1.995 INCHES MINIMUM AND
2.005 INCHES MAXIMUM
BODY LENGTH2.636 INCHES NOMINAL
MOUNTING LIP DIAMETER1.9950 INCHES MINIMUM
MOUNTING LIP DEPTH0.0880 INCHES MINIMUM AND
0.0980 INCHES MAXIMUM
ACTUATOR TYPESINGLE SHAFT
SHAFT STYLEROUND
SHAFT DIAMETER0.250 INCHES NOMINAL
SHAFT LENGTH0.656 INCHES MINIMUM AND
0.688 INCHES MAXIMUM
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3620.0 NOMINAL
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
MOUNTING METHODCLAMP RING
TERMINAL TYPE AND QUANTITY4 TURRET
TERMINAL LENGTH0.590 INCHES NOMINAL
TERMINAL LOCATIONREAR END
RELIABILITY INDICATORNOT ESTABLISHED
OVERALL LENGTH3.573 INCHES MINIMUM AND
3.605 INCHES MAXIMUM
OVERALL DIAMETER1.995 INCHES MINIMUM AND
2.005 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us