| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 1440.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ANGLE OF MOUNTING HOLE IN DEG | 30.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 180.0 |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 1.810 INCHES NOMINAL |
| BODY LENGTH | 1.750 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIRST FLAT LENGTH | 0.500 INCHES NOMINAL |
| FLAT HEIGHT | 0.190 INCHES NOMINAL |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 SINGLE SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| OVERALL DIAMETER | 2.530 INCHES MAXIMUM |
| OVERALL LENGTH | 2.500 INCHES NOMINAL |
| MAXIMUM RUNNING TORQUE | 0.40 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 500.00 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.5 |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.8000 INCHES MINIMUM AND 1.8200 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING(S) |
| PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| PILOT DIAMETER | 1.5615 INCHES MINIMUM AND 1.5625 INCHES MAXIMUM |
| PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1440.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT END PLAY | 0.00500 INCHES |
| SHAFT DIAMETER | 0.2496 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND, FLATTED |
| SHAFT LENGTH | 0.750 INCHES NOMINAL |
| UNDERCUT DIAMETER | 1.5615 INCHES MINIMUM AND 1.5625 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0760 INCHES MINIMUM AND 0.0810 INCHES MAXIMUM |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| TERMINAL TYPE AND QUANTITY | 3 TURRET |