|
|
|
National Stock Number:
5905-00-917-7066
Federal Supply Class:
5905
National Item Identification Number:
009177066
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| CM34076 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | SMB528044 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 0.891 INCHES NOMINAL | | BODY LENGTH | 0.953 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS 1ST SECTION | | ELECTRICAL RESISTANCE PER SECTION | 150.0 OHMS 2ND SECTION | | FIRST FLAT LENGTH | 0.375 INCHES NOMINAL | | FLAT HEIGHT | 0.094 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE LOCATION | AT 9 OCLOCK | | NONTURN DEVICE RADIUS | 0.234 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT STYLE | ROUND, FLATTED | | SHAFT LENGTH | 0.750 INCHES NOMINAL | | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS | | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
|
|