|
|
|
National Stock Number:
5905-00-913-7129
Federal Supply Class:
5905
National Item Identification Number:
009137129
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 142017-01 | 35351 | GE AVIATION SYSTEMS LLC | | 200FL1-119 | 08815 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 355.0 MINIMUM | | ELECTRICAL RESISTANCE PER SECTION | 20.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 100.0 SINGLE SECTION | | BEARING TYPE | BEARING SHAFT | | BODY DIAMETER | 2.005 INCHES MAXIMUM | | BODY LENGTH | 0.935 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | CUBIC MEASURE | 4.420 CUBIC INCHES | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | FRAGILITY FACTOR | MODERATELY RUGGED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION STEPPED CONFORMITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30 TO 0.30 SINGLE SECTION | | LATERAL RUNOUT | 0.002 INCHES | | OVERALL DIAMETER | 2.005 INCHES NOMINAL | | OVERALL LENGTH | 1.400 INCHES NOMINAL | | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0650 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING(S) | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | PILOT DIAMETER | 1.8600 INCHES NOMINAL | | PILOT LENGTH | 0.0650 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.02 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT END PLAY | 0.00400 INCHES | | SHAFT DIAMETER | 0.1249 INCHES MAXIMUM | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.400 INCHES NOMINAL | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 600.0 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -3.0 TO 3.0 OHMS SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL TYPE AND QUANTITY | 4 TURRET | | TEST DATA DOCUMENT | 35351-142017 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.860 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0800 INCHES NOMINAL |
|
|