|
|
|
National Stock Number:
5905-00-912-7792
Federal Supply Class:
5905
National Item Identification Number:
009127792
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 08WB1-3373 | 19176 | SERVO INSTRUMENT CORPORATION | | 576R080H23 | 79500 | WESTINGHOUSE ELECTRIC CORP | | APW1-2-104-23 | 06880 | DATA INSTRUMENTS INC | | AP05-C13-J23 | 18065 | SAMARIUS PRECISION INSTRUMENTS, INC. | | APW1-2-104-23 | 94603 | HONEYWELL SENSING & CONTROL | | 576R080H23 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | CM27192-23 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 300.0 MINIMUM | | ELECTRICAL RESISTANCE PER SECTION | 25.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY DIAMETER | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | BODY LENGTH | 0.580 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FIRST FLAT LENGTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | FLAT HEIGHT | 0.082 INCHES MAXIMUM | | OVERALL DIAMETER | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | OVERALL LENGTH | 1.610 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM | | MOUNTING METHOD | LOCKING BUSHING | | NONTURN DEVICE LOCATION | AT 6 OCLOCK | | NONTURN DEVICE RADIUS | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 330.0 NOMINAL | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | SHAFT STYLE | ROUND, FLATTED | | SHAFT LENGTH | 0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 97942-576R080H23 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|