| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 310.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 214.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 55.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 110.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 90.0 |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 1.100 INCHES MAXIMUM |
| BODY LENGTH | 1.310 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 2 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.03 TO 0.03 SINGLE SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| MAXIMUM RUNNING TORQUE | 0.25 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.30 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 4 |
| MOUNTING METHOD | THREADED HOLE(S) |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.750 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 0.9995 INCHES MINIMUM AND 1.1005 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| PILOT DIAMETER | 0.9663 INCHES MINIMUM AND 0.9668 INCHES MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| SCREW THREAD DIAMETER | 0.112 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 40.0 |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.0007 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| SHAFT LENGTH | 0.560 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.967 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES MINIMUM |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 27.0 SINGLE SECTION AND 196.5 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 DEG ANGULAR ROTATION SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |