|
|
|
National Stock Number:
5905-00-911-4390
Federal Supply Class:
5905
National Item Identification Number:
009114390
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 730251 | 80249 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 30.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION | | SHAFT RUNOUT | 0.001 INCHES | | LATERAL RUNOUT | 0.002 INCHES | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT END PLAY | 0.005 INCHES | | MAXIMUM STARTING TORQUE | 0.06 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 58.2 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 OHMS SINGLE SECTION | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 1.3125 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.312 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL | | BODY DIAMETER | 1.3125 INCHES NOMINAL | | BODY LENGTH | 1.100 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 1.4370 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0730 INCHES MINIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.2499 INCHES NOMINAL | | SHAFT LENGTH | 0.750 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | TERMINAL TYPE AND QUANTITY | 4 TURRET | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 80249-730251 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|