|
|
|
National Stock Number:
5905-00-909-5252
Federal Supply Class:
5905
National Item Identification Number:
009095252
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 1867852-8 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | 255-00HS2K | 0EBU2 | VAMISTOR/WESTON DIV OF VAMISTOR CORP OF TENNESSEE INC | | 255-00HS2K | 94271 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES | | BODY LENGTH | 0.410 INCHES NOMINAL | | BODY WIDTH | 0.150 INCHES NOMINAL | | BODY HEIGHT | 0.375 INCHES NOMINAL | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.411 INCHES MINIMUM AND | | 0.426 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.048 INCHES MINIMUM AND | | 0.052 INCHES MAXIMUM | | SHAFT LENGTH | 0.035 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 8000.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | MOUNTING METHOD | UNTHREADED HOLE | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.066 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 3 PIN | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND | | 0.105 INCHES MAXIMUM | | TERMINAL LENGTH | 0.172 INCHES MINIMUM AND | | 0.202 INCHES MAXIMUM | | TERMINAL LOCATION | REAR END | | RELIABILITY INDICATOR | NOT ESTABLISHED | | OVERALL LENGTH | 0.582 INCHES MINIMUM AND | | 0.612 INCHES MAXIMUM | | OVERALL HEIGHT | 0.375 INCHES NOMINAL | | OVERALL WIDTH | 0.150 INCHES NOMINAL |
|
|