|
|
|
National Stock Number:
5905-00-909-5117
Federal Supply Class:
5905
National Item Identification Number:
009095117
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 1841096-2 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | 205-00L-100HMS | 84048 | VERNITRON CORP VRN INTERNATIONAL DIV | | 2064269-1 | 28527 | L3HARRIS TECHNOLOGIES, INC. | | 205-00L-10OHMS | 84048 | VERNITRON CORP VRN INTERNATIONAL DIV | | 2064269-1 | 95750 | AIRCO REPUBLIC ELECTRONICS, INC. | | 2064269-1 | 98738 | HERLEY CHICAGO DBA STEWART WARNER ELECTRONICS | | 300-239H10 | 0EBU2 | VAMISTOR/WESTON DIV OF VAMISTOR CORP OF TENNESSEE INC | | 300-266HS100J | 15920 | CONTROL DATA CORP ROSEVILLE OPNS TERMINALS AND SMALL SYSTEMS | | 300-130HS100J | 79318 | MEGGITT NORTH HOLLYWOOD INC | | 3250L1-100 | 80294 | BOURNS INSTRUMENTS INC | | 300-239H10 | 94271 | LOCKHEED MARTIN CORP | | 300-130-HS-100HMS | 94271 | LOCKHEED MARTIN CORP | | 300-130-HS-10OHMS | 94271 | LOCKHEED MARTIN CORP | | 966034-1 | 94580 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 8280.0 MINIMUM AND 13680.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 10.0 OHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION | | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES | | BODY WIDTH | 0.200 INCHES MAXIMUM | | FEATURES PROVIDED | HUMIDITY PROOF | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM | | III CUBIC MEASURE | 0.052 CUBIC INCHES | | III FRAGILITY FACTOR | MODERATELY RUGGED | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM RUNNING TORQUE | 10.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 10.00 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 8280.0 MINIMUM AND 13680.0 MAXIMUM | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | BEARING | | SHAFT DIAMETER | 0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM | | SHAFT LENGTH | 0.045 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD | | TEST DATA DOCUMENT | 94580-966034 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|