|
|
|
National Stock Number:
5905-00-909-3967
Federal Supply Class:
5905
National Item Identification Number:
009093967
Description:
RESISTOR,FIXED,COMPOSITION
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of a mixture of carbon, an insulating material, and suitable binders, either molded together or applied as a thin layer of conducting material on an insulated form. The opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the item itself. See also ATTENUATOR, FIXED; RESISTOR, FIXED, FILM; and RESISTOR, THERMAL. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
|
Manufacturer Information:
| 0683-3335 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. | | 0683-3335 | 28480 | HEWLETT-PACKARD COMPANY | | 146493-85 | 00752 | L3HARRIS TECHNOLOGIES, INC. | | 10157601 | 52542 | SYSTRON-DONNER CORP MICROWAVE/INSTRUMENT DIV | | 0683-3335 | 7ZXR5 | KEYSIGHT TECHNOLOGIES INC | | 286-701333-001 | 90073 | CMC ELECTRONICS INC | | CB3335 | 01121 | ROCKWELL AUTOMATION, INC. | | CR-25 1-4-5P-33K | 19701 | NORTH AMERICAN PHILIPS CORP PHILIPS COMPONENTS DISCRETE PRODUCTS DIV | | R-25J | 57668 | R-OHM CORP | | 701-333 | 90073 | CMC ELECTRONICS INC | | B46277 | K0967 | MBDA UK LTD | | Q317002285 | S3092 | RHEINMETALL AIR DEFENCE AG | | W4806433LA | S3092 | RHEINMETALL AIR DEFENCE AG | | W4806433LA | S3118 | OERLIKON-BUEHRLE AG WERKZEUGMASCHINENFABRIK |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 33.000 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 70.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY DIAMETER | 0.090 INCHES NOMINAL | | BODY LENGTH | 0.250 INCHES NOMINAL | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 00752-146493 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|