|
|
|
National Stock Number:
5905-00-907-2020
Federal Supply Class:
5905
National Item Identification Number:
009072020
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 156WS206 | 08815 | HONEYWELL INTERNATIONAL INC | | 6800-3030-1 | 11871 | RECON/OPTICAL, INC. | | 99-586-1 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. | | 978-6003 | 12205 | BUNKER RAMO CORP AMPHENOL CONTROLS DIV | | 978-6003 | 19176 | SERVO INSTRUMENT CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 275.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 1.328 INCHES MAXIMUM | | BODY LENGTH | 1.250 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | OVERALL DIAMETER | 1.328 INCHES MAXIMUM | | OVERALL LENGTH | 1.406 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 2.50 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0640 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 0.8760 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING(S) | | PILOT DIAMETER | 0.7510 INCHES NOMINAL | | PILOT LENGTH | 0.0600 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT LENGTH | 0.436 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.750 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0580 INCHES NOMINAL | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD | | TEST DATA DOCUMENT | 11871-6800-3030-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|