5905-00-906-0002 RESISTOR,VARIABLE,WIRE WOUND,NON Index 5905-00-906-0004 RESISTOR,VARIABLE,WIREWOUND,NON

National Stock Number:
5905-00-906-0003

Federal Supply Class:
5905

National Item Identification Number:
009060003

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
6103R1K1KL0-5CT73138BI TECHNOLOGIES CORPORATION


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION335.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION1.0 KILOHMS ALL SECTIONS
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BEARING TYPEBALL SHAFT
BODY DIAMETER0.891 INCHES NOMINAL
BODY LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FIXED TAP QUANTITY PER SECTION1 1ST SECTION AND 1 2ND SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.50 TO 0.50 SINGLE SECTION
LATERAL RUNOUT0.002 INCHES
OVERALL DIAMETER1.090 INCHES NOMINAL
OVERALL LENGTH1.500 INCHES NOMINAL
MAXIMUM RUNNING TORQUE0.25 INCH-OUNCES
MAXIMUM STARTING TORQUE0.25 INCH-OUNCES
MOUNTING METHODSERVO MTG
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER0.8750 INCHES NOMINAL
PILOT DIAMETER RUNOUT0.001 INCHES
PILOT DIAMETER0.7495 INCHES MINIMUM AND 0.7505 INCHES MAXIMUM
PILOT LENGTH0.0620 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS3.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY2
SHAFT DIAMETER0.125 INCHES NOMINAL
SHAFT RADIAL PLAY0.001 INCHES
SHAFT STYLEROUND
SHAFT LENGTH0.500 INCHES NOMINAL
UNDERCUT DIAMETER0.750 INCHES NOMINAL
UNDERCUT WIDTH0.0620 INCHES NOMINAL
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION167.5 1ST SECTION AND 167.5 2ND SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS500.0 1ST SECTION AND 500.0 2ND SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-200.0 TO 200.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY8 SOLDER STUD


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us