|
|
|
National Stock Number:
5905-00-905-6277
Federal Supply Class:
5905
National Item Identification Number:
009056277
Description:
RESISTOR,FIXED,COMPOSITION
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of a mixture of carbon, an insulating material, and suitable binders, either molded together or applied as a thin layer of conducting material on an insulated form. The opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the item itself. See also ATTENUATOR, FIXED; RESISTOR, FIXED, FILM; and RESISTOR, THERMAL. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
|
Manufacturer Information:
| 041-530 | 0PN68 | AMPEX DATA SYSTEMS CORPORATION | | 041-530 | 92739 | AMPEX SYSTEMS CORP | | 146493-29 | 00752 | L3HARRIS TECHNOLOGIES, INC. | | 120-00-73 | 18748 | INTERNATIONAL ARMAMENT CORP | | 0683-1505 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. | | 0683-1505 | 28480 | HEWLETT-PACKARD COMPANY | | CB1505 | 01121 | ROCKWELL AUTOMATION, INC. | | CR-25 1-4-5P-15E | 19701 | NORTH AMERICAN PHILIPS CORP PHILIPS COMPONENTS DISCRETE PRODUCTS DIV | | R-25J | 57668 | R-OHM CORP | | 286-701150-001 | 90073 | CMC ELECTRONICS INC | | 701-150 | 90073 | CMC ELECTRONICS INC | | Q 317 002 205 | C2463 | RHEINMETALL SOLDIER ELECTRONICS GMBH | | W4806115LA | S3092 | RHEINMETALL AIR DEFENCE AG | | W4806115LA | S3118 | OERLIKON-BUEHRLE AG WERKZEUGMASCHINENFABRIK |
|
Techincal Specification:
| AMBIENT TEMP AT FULL RATED POWER | 70.0 CELSIUS | | BODY DIAMETER | 0.090 INCHES NOMINAL | | BODY LENGTH | 0.250 INCHES NOMINAL | | ELECTRICAL RESISTANCE | 15.000 OHMS | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 00752-146493 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|