| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| BODY DIAMETER | 1.422 INCHES MINIMUM AND 1.454 INCHES MAXIMUM |
| BODY LENGTH | 2.080 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 352.0 MINIMUM AND 356.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 24.0 KILOHMS ALL SECTIONS |
| FIXED TAP QUANTITY PER SECTION | 6 ALL SECTIONS |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20 TO 0.20 ALL SECTIONS |
| MAXIMUM RUNNING TORQUE | 1.50 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 2.20 INCH-OUNCES |
| PILOT DIAMETER | 1.3120 INCHES NOMINAL |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| MOUNTING LIP DEPTH | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 2.0800 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING(S) |
| OVERALL DIAMETER | 1.707 INCHES MAXIMUM |
| OVERALL LENGTH | 2.924 INCHES MAXIMUM |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 3 |
| SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| SHAFT LENGTH | 0.688 INCHES NOMINAL |
| SHAFT STYLE | ROUND |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 10.0 ALL SECTIONS AND 44.5 ALL SECTIONS AND 79.0 ALL SECTIONS AND 125.0 ALL SECTIONS AND 214.0 ALL SECTIONS AND 309.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 27 SOLDER STUD |
| TEST DATA DOCUMENT | 56232-2325490 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| UNDERCUT DIAMETER | 1.312 INCHES MAXIMUM |