| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 356.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 500.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 2.000 INCHES NOMINAL |
| BODY LENGTH | 1.020 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 2 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30 TO 0.30 SINGLE SECTION |
| LATERAL RUNOUT | 0.006 INCHES |
| MAXIMUM RUNNING TORQUE | 1.10 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 6.00 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.531 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL |
| MOUNTING METHOD | CLAMP RING(S) AND THREADED HOLE(S) |
| PILOT DIAMETER RUNOUT | 0.0015 INCHES |
| PILOT DIAMETER | 1.8750 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SECTION QUANTITY | 1 |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 1.062 INCHES NOMINAL |
| UNDERCUT DIAMETER | 1.875 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 159.0 SINGLE SECTION AND 259.0 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 DEG ANGULAR ROTATION SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| TERMINAL TYPE AND QUANTITY | 5 SOLDER STUD |