|
|
|
National Stock Number:
5905-00-884-0961
Federal Supply Class:
5905
National Item Identification Number:
008840961
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 300-67H10 | 0EBU2 | VAMISTOR/WESTON DIV OF VAMISTOR CORP OF TENNESSEE INC | | 300-67H10 | 94271 | LOCKHEED MARTIN CORP | | 830877 | 98571 | TELEDYNE CONTROLS, LLC |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | SHAFT LENGTH | 0.100 INCHES MAXIMUM | | BODY LENGTH | 0.500 INCHES NOMINAL | | SPECIAL FEATURES | SHAFT W/ALLEN HEAD | | MOUNTING FACILITY QUANTITY | 2 | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD | | TERMINAL LOCATION | REAR END | | SHAFT DIAMETER | 0.060 INCHES NOMINAL | | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT STYLE | ROUND | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | MOUNTING SLOT WIDTH | 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM | | BODY WIDTH | 0.187 INCHES NOMINAL | | TEST DATA DOCUMENT | 98571-830877 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL | | MOUNTING METHOD | UNTHREADED HOLE | | ELECTRICAL RESISTANCE PER SECTION | 10.0 OHMS SINGLE SECTION | | BODY HEIGHT | 0.500 INCHES NOMINAL | | RELIABILITY INDICATOR | NOT ESTABLISHED | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
|
|