5905-00-882-6380, RESISTOR,VARIABLE,WIRE WOUND,NON

5905-00-882-6381 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-882-6380

Federal Supply Class:
5905

National Item Identification Number:
008826380

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

005912515	D1876	WARTSILA ELAC NAUTIK GMBH
062800923	D1876	WARTSILA ELAC NAUTIK GMBH
275-1-202	80294	BOURNS INSTRUMENTS INC
64A0000-005	94117	BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
RP548-05-202	S3090	SVENSKA PHILIPS AB

Techincal Specification:

ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	105.0 SINGLE SECTION
BODY HEIGHT	0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
BODY LENGTH	1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM
BODY WIDTH	0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS SINGLE SECTION
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
MOUNTING FACILITY QUANTITY	2
MOUNTING HOLE DIAMETER	0.086 INCHES MINIMUM AND 0.091 INCHES MAXIMUM
MOUNTING METHOD	UNTHREADED HOLE(S)
OVERALL HEIGHT	0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
OVERALL LENGTH	1.283 INCHES MINIMUM AND 1.343 INCHES MAXIMUM
OVERALL WIDTH	0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION
PRECIOUS MATERIAL	GOLD
PRECIOUS MATERIAL AND LOCATION	TERMINALS GOLD
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
SHAFT LENGTH	0.048 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
SPECIAL FEATURES	SELF-LOCKING SHAFT
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	-20.0 TO 20.0 SINGLE SECTION
TERMINAL LOCATION	LOWER ADJACENT SIDE TWO ROWS
TERMINAL LENGTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY	3 PIN

Click here to Register for Free 30-day Trial