|
|
|
National Stock Number:
5905-00-878-8699
Federal Supply Class:
5905
National Item Identification Number:
008788699
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 151E6800P0RM5PCT | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 1621602-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 223S6K800J | 44655 | OHMITE HOLDING, L.L.C. | | 333S6K800J | 44655 | OHMITE HOLDING, L.L.C. | | 242E6825 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 242E6825 | 80183 | SPRAGUE PRODUCTS CO | | 922465-15 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 62301-6800 | 44655 | OHMITE HOLDING, L.L.C. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 6.800 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 40.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 340.0 | | BODY DIAMETER | 0.170 INCHES MINIMUM AND 0.230 INCHES MAXIMUM | | BODY LENGTH | 0.470 INCHES MINIMUM AND 0.560 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 3.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 350.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 | | TERMINAL LENGTH | 1.370 INCHES MINIMUM AND 1.620 INCHES MAXIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 06481-922465 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|