|
|
|
National Stock Number:
5905-00-864-6560
Federal Supply Class:
5905
National Item Identification Number:
008646560
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| X900182-2 | 05257 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION |
|
Techincal Specification:
| SECTION QUANTITY | 2 | | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS 1ST SECTION | | 10.0 KILOHMS 2ND SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 ALL SECTIONS | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15 TO 0.15 ALL SECTIONS | | SHAFT RUNOUT | 0.001 INCHES | | LATERAL RUNOUT | 0.003 INCHES | | PILOT DIAMETER RUNOUT | 0.0015 INCHES | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT BEARING TYPE | BALL | | SHAFT END PLAY | 0.004 INCHES | | MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 1.20 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 0.6240 INCHES MINIMUM AND | | 0.6250 INCHES MAXIMUM | | PILOT LENGTH | 0.0570 INCHES MINIMUM AND | | 0.0670 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.624 INCHES MINIMUM AND | | 0.625 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0580 INCHES MINIMUM AND | | 0.0680 INCHES MAXIMUM | | BODY DIAMETER | 0.859 INCHES MINIMUM AND | | 0.891 INCHES MAXIMUM | | BODY LENGTH | 2.995 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND | | 0.8800 INCHES MAXIMUM | | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND | | 0.0670 INCHES MAXIMUM | | ANGLE OF MOUNTING HOLE IN DEG | 90.0 | | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 | | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.750 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND | | 0.1248 INCHES MAXIMUM | | SHAFT LENGTH | 0.344 INCHES MINIMUM AND | | 0.406 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | FEATURES PROVIDED | NONMETALLIC SHAFT | | TERMINAL TYPE AND QUANTITY | 6 TURRET | | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SPECIAL FEATURES | LUBRICATION ORIFICE FLUSH WITH REAR OF POT | | TEST DATA DOCUMENT | 05257-X900182 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 3.370 INCHES NOMINAL | | OVERALL DIAMETER | 1.062 INCHES NOMINAL |
|
|