5330-00-862-9065 GASKET Index 2590-00-862-9068 LEAD,ASSEMBLY,BRANC

National Stock Number:
5905-00-862-9067

Federal Supply Class:
5905

National Item Identification Number:
008629067

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
302-504802111VISHAY SPRAGUE INC
804533-164547HONEYWELL INTERNATIONAL, INC
805294-164547HONEYWELL INTERNATIONAL, INC
805294-170210HONEYWELL INTERNATIONAL INC.
804533-170210HONEYWELL INTERNATIONAL INC.


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION312.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION10.0 OHMS 4TH SECTION
ELECTRICAL RESISTANCE PER SECTION10.0 OHMS 5TH SECTION
ELECTRICAL RESISTANCE PER SECTION15.0 OHMS 3RD SECTION
ELECTRICAL RESISTANCE PER SECTION20.0 OHMS 1ST SECTION
ELECTRICAL RESISTANCE PER SECTION25.0 OHMS 2ND SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER121.0 ALL SECTIONS
BEARING TYPEBALL SHAFT
BODY DIAMETER2.030 INCHES MAXIMUM
BODY LENGTH2.860 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
FUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.10 TO 0.10 1ST SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.15 TO 0.15 5TH SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.20 TO 0.20 2ND SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.20 TO 0.20 3RD SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 4TH SECTION
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER2.0000 INCHES NOMINAL
MOUNTING METHODCLAMP RING(S)
NONTURN DEVICE RADIUS0.710 INCHES MAXIMUM
NONTURN DEVICE LOCATIONAT 9 OCLOCK
PILOT DIAMETER1.0000 INCHES MAXIMUM
PILOT LENGTH0.0620 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS0.15 FREE AIR 2ND SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS0.10 FREE AIR 3RD SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS0.10 FREE AIR 5TH SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS0.25 FREE AIR 1ST SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS0.67 FREE AIR 4TH SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG312.0 NOMINAL
SECTION QUANTITY5
SHAFT DIAMETER0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM
SHAFT STYLEROUND
SHAFT LENGTH0.830 INCHES NOMINAL
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY15 TURRET
UNDERCUT DIAMETER1.880 INCHES MAXIMUM
UNDERCUT WIDTH0.0620 INCHES MINIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us