|
|
|
National Stock Number:
5905-00-860-4056
Federal Supply Class:
5905
National Item Identification Number:
008604056
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| C615000 | 03487 | ANDREA ELECTRONICS CORPORATION | | C615000 | 3GET4 | ANDREA SYSTEMS LLC | | MA3 | 03487 | ANDREA ELECTRONICS CORPORATION | | MA3 | 3GET4 | ANDREA SYSTEMS LLC |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 100.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | SHAFT BEARING TYPE | SLEEVE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | DEVICE DESIGN TYPE | NONTURN AT 6 OCLOCK | | NONTURN AT 12 OCLOCK | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 0.500 INCHES NOMINAL | | BODY LENGTH | 0.453 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.250 INCHES MINIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND | | 0.126 INCHES MAXIMUM | | SHAFT LENGTH | 0.688 INCHES NOMINAL | | NONTURN DEVICE RADIUS | 0.245 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SPECIAL FEATURES | SUPPLIED WITH PIN FOR 0.046 IN. DIAMETER HOLE IN SHAFT | | OVERALL LENGTH | 1.376 INCHES NOMINAL | | OVERALL DIAMETER | 0.500 INCHES NOMINAL | | FRAGILITY FACTOR | MODERATELY RUGGED |
|
|