|
|
|
National Stock Number:
5905-00-826-9524
Federal Supply Class:
5905
National Item Identification Number:
008269524
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| AP05C530-3 | 02297 | ACE ELECTRONICS ASSOCIATES INC | | BA99420-3 | 08815 | HONEYWELL INTERNATIONAL INC | | BA99420-3 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | BA99420-3 | 92663 | AT AND T CO ADVANCED TECHNOLOGY SYSTEMS | | RV1-2565D3M0D | 99957 | BOWMAR/TIC INC SUB OF BOWMAR INSTRUMENT CORP |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 100.000 OHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 80.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 145.0 SINGLE SECTION | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 0.495 INCHES MINIMUM AND | | 0.505 INCHES MAXIMUM | | BODY LENGTH | 0.625 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.344 INCHES MINIMUM AND | | 0.719 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | SHAFT LENGTH | 0.719 INCHES MINIMUM AND | | 0.781 INCHES MAXIMUM | | NONTURN DEVICE LOCATION | AT 12 OCLOCK | | NONTURN DEVICE RADIUS | 0.177 INCHES MINIMUM AND | | 0.197 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD | | TERMINAL LOCATION | REAR END | | RELIABILITY INDICATOR | NOT ESTABLISHED | | OVERALL LENGTH | 1.508 INCHES NOMINAL | | OVERALL DIAMETER | 0.495 INCHES MINIMUM AND | | 0.505 INCHES MAXIMUM |
|
|