|
|
|
National Stock Number:
5905-00-815-7885
Federal Supply Class:
5905
National Item Identification Number:
008157885
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 10051273 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 236P1-253 | 80294 | BOURNS INSTRUMENTS INC | | 8954937-65 | 02734 | LOCKHEED MARTIN CORPORATION | | 8954937-65 | 49671 | LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION SYSTEMS AUTOMATED SPARES | | 575R312H14 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 575R312H14 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | CM22522-14 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 25.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.8 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 135.0 SINGLE SECTION | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY LENGTH | 1.340 INCHES MAXIMUM | | BODY WIDTH | 0.300 INCHES MAXIMUM | | BODY HEIGHT | 0.360 INCHES MAXIMUM | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND | | 1.005 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.115 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM | | SHAFT LENGTH | 0.030 INCHES MINIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | MOUNTING METHOD | UNTHREADED HOLE | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.086 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 3 PIN | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.690 INCHES MINIMUM AND | | 0.710 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.310 INCHES NOMINAL | | TERMINAL LENGTH | 0.484 INCHES MINIMUM AND | | 0.516 INCHES MAXIMUM | | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 80294-9163641 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 1.370 INCHES NOMINAL | | OVERALL HEIGHT | 0.860 INCHES NOMINAL | | OVERALL WIDTH | 0.300 INCHES MAXIMUM |
|
|