5935-00-811-5857 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5935-00-811-5860 SOCKET,PLUG-IN ELECTRONIC COMPON

National Stock Number:
5905-00-811-5859

Federal Supply Class:
5905

National Item Identification Number:
008115859

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
77C703626P103538LOCKHEED MARTIN CORPORATION
G3-10205-610112GENERAL DYNAMICS MOTION CONTROL LLC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION0.349 MINIMUM AND 0.351 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER75.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY DIAMETER1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM
BODY LENGTH0.985 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FIXED TAP QUANTITY PER SECTION2 SINGLE SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.05 TO 0.05 SINGLE SECTION
OVERALL DIAMETER2.252 INCHES MAXIMUM
OVERALL LENGTH1.766 INCHES MAXIMUM
MAXIMUM STARTING TORQUE0.50 INCH-OUNCES
MOUNTING LIP DEPTH0.0560 INCHES MINIMUM AND 0.0660 INCHES MAXIMUM
MOUNTING LIP DIAMETER1.9950 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM
MOUNTING METHODCLAMP RING(S)
PILOT DIAMETER1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM
PILOT LENGTH0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS2.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
SHAFT STYLEROUND
SHAFT LENGTH0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
UNDERCUT DIAMETER1.874 INCHES NOMINAL
UNDERCUT WIDTH0.0600 INCHES MINIMUM
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS2500.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us