|
|
|
National Stock Number:
5905-00-763-6355
Federal Supply Class:
5905
National Item Identification Number:
007636355
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 7600046-1 | 07421 | L3HARRIS INTERSTATE ELECTRONICS CORPORATION | | 7600046-1 | 93322 | GE AVIATION SYSTEMS LLC DBA GE AVIATION |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -5.0 TO 5.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1000.0 SINGLE SECTION | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES | | BODY LENGTH | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | BODY WIDTH | 0.182 INCHES MINIMUM AND | | 0.197 INCHES MAXIMUM | | BODY HEIGHT | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.515 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.074 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | SHAFT LENGTH | 0.030 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | MOUNTING METHOD | UNTHREADED HOLE | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.090 INCHES MINIMUM AND | | 0.096 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD | | TERMINAL LOCATION | REAR END | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 93322-7600046-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 0.530 INCHES NOMINAL | | OVERALL HEIGHT | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | OVERALL WIDTH | 0.182 INCHES MINIMUM AND | | 0.197 INCHES MAXIMUM |
|
|