|
|
|
National Stock Number:
5905-00-763-5634
Federal Supply Class:
5905
National Item Identification Number:
007635634
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 373734-2 | 00752 | L3HARRIS TECHNOLOGIES, INC. | | 373734-2 | 08815 | HONEYWELL INTERNATIONAL INC | | 373734-2 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. | | 373734-2 | 80294 | BOURNS INSTRUMENTS INC |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG SINE-COSINE | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION | | SHAFT RUNOUT | 0.001 INCHES | | LATERAL RUNOUT | 0.001 INCHES | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | SHAFT RADIAL PLAY | 0.001 INCHES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.25 | | SHAFT BEARING TYPE | BEARING | | SHAFT END PLAY | 0.005 INCHES | | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 0.40 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.25 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 0.9683 INCHES MINIMUM AND | | 0.9688 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.975 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM | | BODY DIAMETER | 1.125 INCHES MAXIMUM | | BODY LENGTH | 0.810 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 1.0620 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | SHAFT LENGTH | 0.625 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | TERMINAL TYPE AND QUANTITY | 6 TURRET | | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 00752-373734 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | FRAGILITY FACTOR | RUGGED |
|
|