|
|
|
National Stock Number:
5905-00-763-5369
Federal Supply Class:
5905
National Item Identification Number:
007635369
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 381-0389-050 | 13499 | ROCKWELL COLLINS, INC. | | 381-0389-050 | 95105 | ROCKWELL COLLINS, INC. | | DMS 85017B | 14933 | DEFENSE ELECTRONICS SUPPLY CENTER | | DMS 85017B | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | MILR27208-2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 412-1959 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | RT10C2L202 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES | | BODY LENGTH | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | BODY WIDTH | 0.182 INCHES MINIMUM AND | | 0.197 INCHES MAXIMUM | | BODY HEIGHT | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.513 INCHES MINIMUM AND | | 0.526 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.058 INCHES MINIMUM AND | | 0.098 INCHES MAXIMUM | | SHAFT LENGTH | 0.025 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7200.0 MINIMUM AND | | 16200.0 MAXIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 MINIMUM AND | | 16200.0 MAXIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.090 INCHES MINIMUM AND | | 0.098 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 3 PIN | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | | TERMINAL LENGTH | 6.000 INCHES MINIMUM | | TERMINAL LOCATION | REAR END | | RELIABILITY INDICATOR | NOT ESTABLISHED | | OVERALL LENGTH | 0.515 INCHES MINIMUM AND | | 0.555 INCHES MAXIMUM | | OVERALL HEIGHT | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | OVERALL WIDTH | 0.182 INCHES MINIMUM AND | | 0.197 INCHES MAXIMUM | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILR27208-2 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | RT10C2L202 |
|
|