|
|
|
National Stock Number:
5905-00-723-3694
Federal Supply Class:
5905
National Item Identification Number:
007233694
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 1226 | 35627 | PRECISION ELECTRONICS CORPORATION | | 412945-1 | 96214 | RAYTHEON COMPANY | | 733020 | 56232 | LOCKHEED MARTIN CORPORATION | | 733020REVC | 56232 | LOCKHEED MARTIN CORPORATION | | AQ7676 | 71450 | CTS CORP | | 733020 | 77068 | ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV | | CM13033 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | D37WS4-75K-20K | 12697 | CLAROSTAT SENSORS AND CONTROLS | | FW19433 | 71450 | CTS CORP |
|
Techincal Specification:
| SECTION QUANTITY | 2 | | ELECTRICAL RESISTANCE PER SECTION | 75.0 KILOHMS 1ST SECTION | | 20.0 KILOHMS 2ND SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 ALL SECTIONS | | TERMINAL LOCATION | REAR-BOTTOM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 ALL SECTIONS | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | OPERATING POSITION | START OF ROTATION | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | UNDERCUT DIAMETER | 0.186 INCHES NOMINAL | | BODY DIAMETER | 1.125 INCHES NOMINAL | | BODY LENGTH | 1.468 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | ACTUATOR TYPE | DUAL CONCENTRIC | | SHAFT STYLE | ROUND, STEPPED | | SHAFT DIAMETER | 0.266 INCHES MAXIMUM | | SHAFT LENGTH | 1.250 INCHES NOMINAL | | UNDERCUT LENGTH | 0.438 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 300.0 NOMINAL | | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | FEATURES PROVIDED | SWITCH | | SWITCH TYPE | ROTARY | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 1.000 AC AND | | 3.000 DC | | SWITCH VOLTAGE RATING IN VOLTS | 250.0 AND | | 120.0 | | TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 06840-733020BD DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | FRAGILITY FACTOR | MODERATELY RUGGED |
|
|