5935-00-674-9604 CONNECTOR SET,ELECTRICAL Index 5905-00-674-9615 RESISTOR,VARIABLE,WIRE WOUND,PRE

National Stock Number:
5905-00-674-9614

Federal Supply Class:
5905

National Item Identification Number:
006749614

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
1807040-102111VISHAY SPRAGUE INC
1807040-108638ALLIANT TECHSYSTEMS INC ORDNANCE SYSTEMS DIV
1807040-110001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
1807040-111534BEI SENSORS & SYSTEMS COMPANY, INC.
3700-66211534BEI SENSORS & SYSTEMS COMPANY, INC.
1807040-1C7407IV-ELECTRONIC KLAUS VESPERMANN KG


Techincal Specification:
SECTION QUANTITY2
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS ALL SECTIONS
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
FUNCTION CONFORMITY PER SECTIONALL SECTIONS INDEPENDENT LINEARITY
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.025 TO 0.025 ALL SECTIONS
SHAFT BEARING TYPEBEARING
POWER DISSIPATION RATING PER SECTION IN WATTS5.0 FREE AIR ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 ALL SECTIONS
FIXED TAP QUANTITY PER SECTION2 1ST SECTION
2 2ND SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION287.0 1ST SECTION AND
2844.0 1ST SECTION
287.0 2ND SECTION AND
2844.0 2ND SECTION
BODY STYLECYLINDRICAL SERVO MOUNTED
PILOT DIAMETER0.7490 INCHES MINIMUM AND
0.7500 INCHES MAXIMUM
PILOT LENGTH0.0520 INCHES MINIMUM AND
0.0720 INCHES MAXIMUM
UNDERCUT DIAMETER1.8740 INCHES MINIMUM AND
1.8750 INCHES MAXIMUM
UNDERCUT WIDTH0.0520 INCHES MINIMUM AND
0.0720 INCHES MAXIMUM
BODY DIAMETER1.990 INCHES MINIMUM AND
2.010 INCHES MAXIMUM
BODY LENGTH3.904 INCHES MAXIMUM
MOUNTING LIP DIAMETER1.9900 INCHES MINIMUM AND
2.0100 INCHES MAXIMUM
MOUNTING LIP DEPTH0.0520 INCHES MINIMUM AND
0.0720 INCHES MAXIMUM
MOUNTING HOLE/STUD CIRCLE DIAMETER0.927 INCHES MINIMUM AND
0.947 INCHES MAXIMUM
SHAFT STYLEROUND
SHAFT DIAMETER0.2494 INCHES MINIMUM AND
0.2497 INCHES MAXIMUM
SHAFT LENGTH0.595 INCHES MINIMUM AND
0.655 INCHES MAXIMUM
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3595.0 MINIMUM AND
3605.0 MAXIMUM
ACTUATOR TRAVEL CONTROL FEATURECLUTCH
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3595.0 MINIMUM AND
3605.0 MAXIMUM
MOUNTING METHODCLAMP RING AND
THREADED HOLE
SCREW THREAD SERIES DESIGNATORUNC
SCREW THREAD DIAMETER0.164 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
TERMINAL TYPE AND QUANTITY10 TAB, SOLDER LUG
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
RELIABILITY INDICATORNOT ESTABLISHED
SPECIAL FEATURESFOUR FIXED WIREWOUND RESISTORS ATTACHED TO BACK OF ITEM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us