|
|
|
National Stock Number:
5905-00-612-8249
Federal Supply Class:
5905
National Item Identification Number:
006128249
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 746-6500 | 19176 | SERVO INSTRUMENT CORPORATION | | 7714639P2 | 03538 | LOCKHEED MARTIN CORPORATION | | AMB471 | 19176 | SERVO INSTRUMENT CORPORATION | | AMB-471 | 96791 | BUNKER RAMO CORP AMPHENOL CONTROLS DIV |
|
Techincal Specification:
| SECTION QUANTITY | 2 | | ELECTRICAL RESISTANCE PER SECTION | 25.0 KILOHMS 1ST SECTION | | 2.0 KILOHMS 2ND SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS EQUATION | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -5.00 TO 5.00 1ST SECTION | | -1.00 TO 1.00 2ND SECTION | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS | | POWER DISSIPATION RATING PER SECTION IN WATTS | 3.5 FREE AIR 1ST SECTION | | 1.0 FREE AIR 2ND SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 90.0 ALL SECTIONS | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 1.5620 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | UNDERCUT DIAMETER | 1.562 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM | | BODY DIAMETER | 1.750 INCHES NOMINAL | | BODY LENGTH | 1.560 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 1.7500 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | ACTUATOR TYPE | DOUBLE ENDED SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | SHAFT LENGTH | 0.922 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 MINIMUM | | MOUNTING METHOD | CLAMP RING | | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 03538-7714639 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 2.607 INCHES NOMINAL |
|
|