|
|
|
National Stock Number:
5905-00-583-0545
Federal Supply Class:
5905
National Item Identification Number:
005830545
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 1001531-4 | 56232 | LOCKHEED MARTIN CORPORATION | | A10W502J | 91637 | VISHAY DALE ELECTRONICS, LLC | | A10W5K | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.8 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY LENGTH | 1.266 INCHES MAXIMUM | | BODY WIDTH | 0.205 INCHES MINIMUM AND | | 0.235 INCHES MAXIMUM | | BODY HEIGHT | 0.297 INCHES MINIMUM AND | | 0.328 INCHES MAXIMUM | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND | | 1.005 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.010 INCHES NOMINAL | | SHAFT LENGTH | 0.047 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | MOUNTING METHOD | UNTHREADED HOLE | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.091 INCHES MINIMUM AND | | 0.095 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 3 TAB W/WIRE LEAD | | TERMINAL LOCATION | REAR END | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 56232-1001531 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 1.328 INCHES NOMINAL | | OVERALL HEIGHT | 0.297 INCHES MINIMUM AND | | 0.328 INCHES MAXIMUM | | OVERALL WIDTH | 0.205 INCHES MINIMUM AND | | 0.235 INCHES MAXIMUM |
|
|