|
|
|
National Stock Number:
5905-00-569-5562
Federal Supply Class:
5905
National Item Identification Number:
005695562
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 1182568 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 17W1-2278 | 19176 | SERVO INSTRUMENT CORPORATION | | RV1S128A | 04454 | SENSOR SYSTEMS, L.L.C. | | RV1S128A | 99957 | BOWMAR/TIC INC SUB OF BOWMAR INSTRUMENT CORP | | RV1S128 | 99957 | BOWMAR/TIC INC SUB OF BOWMAR INSTRUMENT CORP |
|
Techincal Specification:
| SECTION QUANTITY | 2 | | ELECTRICAL RESISTANCE PER SECTION | 6.250 KILOHMS ALL SECTIONS | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 ALL SECTIONS | | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 25.0 ALL SECTIONS | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 0.9630 INCHES MINIMUM AND | | 0.9680 INCHES MAXIMUM | | PILOT LENGTH | 0.0570 INCHES MINIMUM AND | | 0.0670 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.963 INCHES MINIMUM AND | | 0.973 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0005 INCHES MINIMUM AND | | 0.0006 INCHES MAXIMUM | | BODY DIAMETER | 1.062 INCHES NOMINAL | | BODY LENGTH | 0.625 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.0570 INCHES MINIMUM AND | | 1.0670 INCHES MAXIMUM | | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND | | 0.0620 INCHES MAXIMUM | | ANGLE OF MOUNTING HOLE IN DEG | 120.0 | | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 60.0 | | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.000 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT LENGTH | 0.688 INCHES NOMINAL | | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 100.0 NOMINAL | | MOUNTING METHOD | UNTHREADED HOLE | | MOUNTING FACILITY QUANTITY | 3 | | MOUNTING HOLE DIAMETER | 0.125 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED |
|
|