|
|
|
National Stock Number:
5905-00-501-9850
Federal Supply Class:
5905
National Item Identification Number:
005019850
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 6600 | 44655 | OHMITE HOLDING, L.L.C. | | H250F2T2 | 44655 | OHMITE HOLDING, L.L.C. |
|
Techincal Specification:
| SECTION QUANTITY | 2 | | ELECTRICAL RESISTANCE PER SECTION | 250.0 OHMS ALL SECTIONS | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | POWER DISSIPATION RATING PER SECTION IN WATTS | 25.0 FREE AIR ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 340.0 ALL SECTIONS | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 1.562 INCHES NOMINAL | | BODY LENGTH | 3.500 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.281 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, FLATTED | | FIRST FLAT LENGTH | 0.344 INCHES NOMINAL | | FLAT HEIGHT | 0.219 INCHES NOMINAL | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 0.781 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SPECIAL FEATURES | SUPPLIED IN BRACKET | | FRAGILITY FACTOR | MODERATELY RUGGED |
|
|