|
|
|
National Stock Number:
5905-00-488-8027
Federal Supply Class:
5905
National Item Identification Number:
004888027
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 311-1393-00 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | 311-1393-00 | 80009 | TEKTRONIX, INC. | | CM39702 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| SECTION QUANTITY | 2 | | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS 1ST SECTION | | 5.0 MEGOHMS 2ND SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 ALL SECTIONS | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | UNDERCUT DIAMETER | 0.109 INCHES NOMINAL | | BODY DIAMETER | 0.625 INCHES NOMINAL | | BODY LENGTH | 0.383 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.234 INCHES MINIMUM AND | | 0.266 INCHES MAXIMUM | | ACTUATOR TYPE | DUAL CONCENTRIC | | SHAFT STYLE | ROUND, STEPPED | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND | | 0.126 INCHES MAXIMUM | | SHAFT LENGTH | 0.656 INCHES MINIMUM AND | | 0.953 INCHES MAXIMUM | | UNDERCUT LENGTH | 0.477 INCHES NOMINAL | | NONTURN DEVICE RADIUS | 0.312 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | RELIABILITY INDICATOR | NOT ESTABLISHED | | OVERALL DIAMETER | 0.875 INCHES NOMINAL |
|
|