|
|
|
National Stock Number:
5905-00-474-2132
Federal Supply Class:
5905
National Item Identification Number:
004742132
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 12073C101 | 0LJJ1 | CUSTOM MANUFACTURING SOLUTIONS, INC | | 12073C101 | 69282 | JBK MANUFACTURING, LLC | | 862746 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | 862746 | 83298 | ALLIED SIGNAL INC AEROSPACE EQUIPMENT SYSTEMS EATONTOWN SITE |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 4.0 OHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 0.0 TO 20.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 3.0 FREE AIR SINGLE SECTION | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 1.438 INCHES NOMINAL | | BODY LENGTH | 0.375 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, PARALLEL FLATTED | | FIRST FLAT LENGTH | 0.161 INCHES MINIMUM AND | | 0.191 INCHES MAXIMUM | | FLAT HEIGHT | 0.125 INCHES NOMINAL | | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | SHAFT LENGTH | 0.609 INCHES NOMINAL | | MOUNTING METHOD | BRACKET AND | | STANDARD BUSHING AND | | UNTHREADED HOLE | | MOUNTING FACILITY QUANTITY | 2 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED |
|
|