5905-00-456-4030 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5910-00-456-4040 CAPACITOR,FIXED,MICA DIELECTRIC

National Stock Number:
5905-00-456-4032

Federal Supply Class:
5905

National Item Identification Number:
004564032

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
18-32662A011VPW8GENERAL DYNAMICS MISSION SYSTEMS, INC.
18-32662A0194990MOTOROLA INC. DBA INTEGRATED INFORMATION SYSTEMS GROUP
801-00402111VISHAY SPRAGUE INC
801-402111VISHAY SPRAGUE INC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION100.000 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG120.0
ANGLE OF MOUNTING HOLE IN DEG30.0
BEARING TYPEBEARING SHAFT
BODY DIAMETER2.000 INCHES NOMINAL
BODY LENGTH2.062 INCHES NOMINAL
BODY STYLECYLINDRICAL SERVO MOUNTED
FIXED TAP QUANTITY PER SECTION3 SINGLE SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
OVERALL DIAMETER2.132 INCHES NOMINAL
OVERALL LENGTH2.937 INCHES NOMINAL
MAXIMUM RUNNING TORQUE1.00 INCH-OUNCES
MAXIMUM STARTING TORQUE1.50 INCH-OUNCES
MOUNTING FACILITY QUANTITY3
MOUNTING HOLE/STUD CIRCLE DIAMETER1.250 INCHES NOMINAL
MOUNTING LIP DEPTH0.0930 INCHES NOMINAL
MOUNTING LIP DIAMETER2.0000 INCHES NOMINAL
MOUNTING METHODCLAMP RING(S) AND UNTHREADED HOLE(S)
PILOT DIAMETER1.8750 INCHES NOMINAL
PILOT LENGTH0.0620 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS5.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL
SHAFT STYLEROUND
SHAFT LENGTH0.875 INCHES NOMINAL
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS27778.0 SINGLE SECTION AND 55555.0 SINGLE SECTION AND 83333.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-5.0 TO 5.0 OHMS ALL SECTIONS
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY6 TAB, SOLDER LUG
UNDERCUT DIAMETER1.875 INCHES NOMINAL
UNDERCUT WIDTH0.0930 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us