1560-00-307-0963 ROD,HOLD OPEN ACCESS DOOR Index 5985-00-307-0966 COUPLER,DIRECTIONAL

National Stock Number:
5905-00-307-0965

Federal Supply Class:
5905

National Item Identification Number:
003070965

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
106-400-004358880MEGGITT (NEW HAMPSHIRE), INC
106-400-004399932MOOG INC.
49040-104454SENSOR SYSTEMS, L.L.C.
49040-110112GENERAL DYNAMICS MOTION CONTROL LLC
14C1-322019176SERVO INSTRUMENT CORPORATION


Techincal Specification:
SECTION QUANTITY1
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION ABSOLUTE LINEARITY
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.20 TO 0.20 SINGLE SECTION
SHAFT RUNOUT0.001 INCHES
LATERAL RUNOUT0.001 INCHES
PILOT DIAMETER RUNOUT0.001 INCHES
SHAFT RADIAL PLAY0.001 INCHES
SHAFT END PLAY0.005 INCHES
MAXIMUM STARTING TORQUE0.50 INCH-OUNCES
MAXIMUM RUNNING TORQUE0.50 INCH-OUNCES
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-150.0 TO 300.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY STYLECYLINDRICAL SERVO MOUNTED
PILOT DIAMETER0.7495 INCHES MINIMUM AND
0.7500 INCHES MAXIMUM
PILOT LENGTH0.1250 INCHES NOMINAL
UNDERCUT DIAMETER0.7495 INCHES MINIMUM AND
0.750 INCHES MAXIMUM
UNDERCUT WIDTH0.0600 INCHES NOMINAL
BODY DIAMETER0.880 INCHES MAXIMUM
BODY LENGTH1.000 INCHES MAXIMUM
MOUNTING LIP DIAMETER0.8800 INCHES MAXIMUM
MOUNTING LIP DEPTH0.0600 INCHES NOMINAL
ANGLE OF MOUNTING HOLE IN DEG90.0
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG120.0
MOUNTING HOLE/STUD CIRCLE DIAMETER0.520 INCHES NOMINAL
ACTUATOR TYPEDOUBLE ENDED SHAFT
SHAFT STYLEROUND
SHAFT DIAMETER0.1245 INCHES MINIMUM AND
0.125 INCHES MAXIMUM
SHAFT LENGTH0.500 INCHES NOMINAL
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION328.0 NOMINAL
MOUNTING METHODCLAMP RING
TERMINAL TYPE AND QUANTITY3 TURRET
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
RELIABILITY INDICATORNOT ESTABLISHED
SPECIAL FEATURESSECOND SHAFT RD SLOTTED 0.120 IN. MAX LG
OVERALL LENGTH1.630 INCHES MAXIMUM
OVERALL DIAMETER1.040 INCHES MAXIMUM
THE MANUFACTURERS DATA
MANUFACTURERS CODE58880
DESIGN CONTROL REFERENCE106-400-0043


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us