|
|
|
National Stock Number:
5905-00-279-4535
Federal Supply Class:
5905
National Item Identification Number:
002794535
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 7599055 | 19200 | US ARMY ARDEC RDECOM | | 7602679 | 19200 | US ARMY ARDEC RDECOM | | D176176B 620K 0HMS | 00656 | AEROVOX CORP. | | D176176B 620K OHMS | 00656 | AEROVOX CORP. | | D176176B 620K 0HMS | 30983 | MEPCOPAL CO A JOINT VENTURE | | D176176B 620K 0HMS | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | D176176B6203 | 00656 | AEROVOX CORP. | | D176176B 620K OHMS | 30983 | MEPCOPAL CO A JOINT VENTURE | | D176176B 620K OHMS | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | D176176B6203 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 620.000 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 30.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 121.0 | | BODY DIAMETER | 0.281 INCHES NOMINAL | | BODY LENGTH | 1.000 INCHES NOMINAL | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 1.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | +25.0 TO 85.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -500.0 TO 0.0 | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 64959-D176176 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|