|
|
|
National Stock Number:
5905-00-279-2694
Federal Supply Class:
5905
National Item Identification Number:
002792694
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| J | 44655 | OHMITE HOLDING, L.L.C. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 200.0 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 2.312 INCHES NOMINAL | | BODY LENGTH | 1.375 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | NONTURN DEVICE RADIUS | 0.500 INCHES NOMINAL | | NONTURN DEVICE LOCATION | AT 3 OCLOCK AND AT 6 OCLOCK AND AT 9 OCLOCK AND AT 12 OCLOCK | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.688 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 50.0 FREE AIR SINGLE SECTION | | SPECIAL FEATURES | W/0.063 IN. DIA HOLE THRU SHAFT 5/32 IN. FROM END AND 4-36 BY 1/4 IN. DEEP TAP IN END | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 100.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
|
|