|
|
|
National Stock Number:
5905-00-242-9764
Federal Supply Class:
5905
National Item Identification Number:
002429764
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 055-550-5K | 11236 | CTS CORP BERNE DIV THICK FILM PRODUCTS GROUP | | 382-0006-420 | 95105 | ROCKWELL COLLINS, INC. | | BF04427 | 11236 | CTS CORP BERNE DIV THICK FILM PRODUCTS GROUP |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION | | TERMINAL LOCATION | REAR-BOTTOM | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 HEAT SINK SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | OPERATING POSITION | START OF ROTATION | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 0.750 INCHES NOMINAL | | BODY LENGTH | 0.625 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.312 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 0.938 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 280.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | NONTURN DEVICE RADIUS | 0.438 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | FEATURES PROVIDED | SWITCH | | SWITCH TYPE | ROTARY | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 AC | | SWITCH VOLTAGE RATING IN VOLTS | 125.0 | | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 13499-382-0006 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 1.766 INCHES NOMINAL | | OVERALL DIAMETER | 1.125 INCHES NOMINAL |
|
|