5935-00-057-7068 COVER,ELECTRICAL CONNECTOR Index 5995-00-057-7079 LEAD ASSEMBLY,ELECTRICAL

National Stock Number:
5905-00-057-7076

Federal Supply Class:
5905

National Item Identification Number:
000577076

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
200236-04881413BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
220025P2594117BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
3280W1-20280294BOURNS INSTRUMENTS INC
D5-15-3261-281361EDGEWOOD CHEMICAL BIOLOGICAL CENTER ECBC
381-1765-00095104ALCATEL-LUCENT HOLDINGS INC.
419690-896214RAYTHEON COMPANY


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION2.0 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
BODY HEIGHT0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
BODY LENGTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES
BODY WIDTH0.188 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.200 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL
FEATURES PROVIDEDNONMETALLIC SHAFT
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.250 INCHES NOMINAL
OVERALL HEIGHT0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
OVERALL LENGTH0.715 INCHES NOMINAL
OVERALL WIDTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
MOUNTING FACILITY QUANTITY1
MOUNTING HOLE DIAMETER0.074 INCHES MINIMUM
MOUNTING METHODUNTHREADED HOLE(S)
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT LENGTH0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
SHAFT DIAMETER0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
TERMINAL LOCATIONALL ADJACENT SIDES FROM ADJACENT CONTROL LOCATION NOT OTHERWISE SPECIFIED
TERMINAL LENGTH0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY3 PIN


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us