6105-00-052-6958 MOTOR,ALTERNATING CURRENT Index 5365-00-052-6960 SPACER,LOCKING

National Stock Number:
5905-00-052-6959

Federal Supply Class:
5905

National Item Identification Number:
000526959

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
52804670210HONEYWELL INTERNATIONAL INC.
52804672599ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO
700-095402111VISHAY SPRAGUE INC
700-95402111VISHAY SPRAGUE INC
CM-2369412697CLAROSTAT SENSORS AND CONTROLS


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION286.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION201.0 OHMS 3RD SECTION
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS 1ST SECTION
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS 2ND SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER200.0 ALL SECTIONS
BEARING TYPEBALL SHAFT
BODY DIAMETER0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
BODY LENGTH1.446 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
LATERAL RUNOUT0.003 INCHES
OVERALL DIAMETER1.035 INCHES MAXIMUM
OVERALL LENGTH1.726 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE2.00 INCH-OUNCES
MAXIMUM STARTING TORQUE2.00 INCH-OUNCES
MOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
MOUNTING LIP DIAMETER0.8600 INCHES MINIMUM AND 0.8900 INCHES MAXIMUM
MOUNTING METHODCLAMP RING(S)
PILOT DIAMETER RUNOUT0.0015 INCHES
PILOT DIAMETER0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
PILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR ALL SECTIONS
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 2ND SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-2.0 TO 2.0 3RD SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 1ST SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG343.0 MINIMUM AND 354.0 MAXIMUM
SECTION QUANTITY3
SHAFT END PLAY0.002 INCHES
SHAFT DIAMETER0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT STYLEROUND
SHAFT LENGTH0.257 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY9 TURRET
UNDERCUT DIAMETER0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us