5905-00-051-9064 RESISTOR,FIXED,FILM Index 5910-00-051-9066 CAPACITOR,FIXED,PAPER DIELECTRIC

National Stock Number:
5905-00-051-9065

Federal Supply Class:
5905

National Item Identification Number:
000519065

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
2327698-228528ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST
2327698-231550L3HARRIS TECHNOLOGIES, INC.
500SERV020K02111VISHAY SPRAGUE INC
502-2-1-20302111VISHAY SPRAGUE INC
502SERV020K SINGLE SECTI0N02111VISHAY SPRAGUE INC
502SERV020K SINGLE SECTION02111VISHAY SPRAGUE INC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
BODY DIAMETER0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM
BODY LENGTH1.563 INCHES MINIMUM AND 1.583 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FEATURES PROVIDEDNONMETALLIC SHAFT
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
OVERALL DIAMETER1.010 INCHES MINIMUM AND 1.090 INCHES MAXIMUM
OVERALL LENGTH1.923 INCHES MINIMUM AND 1.983 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE0.30 INCH-OUNCES
MAXIMUM STARTING TORQUE0.40 INCH-OUNCES
MOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
MOUNTING LIP DIAMETER0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM
MOUNTING METHODCLAMP RING(S)
PILOT DIAMETER0.6250 INCHES NOMINAL
PILOT LENGTH0.0630 INCHES MINIMUM AND 0.0730 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS3.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 NOMINAL
SECTION QUANTITY1
SHAFT END PLAY0.005 INCHES
SHAFT DIAMETER0.125 INCHES NOMINAL
SHAFT RADIAL PLAY0.002 INCHES
SHAFT RUNOUT0.002 INCHES
SHAFT STYLEROUND
SHAFT LENGTH0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
UNDERCUT DIAMETER0.625 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
TERMINAL LOCATIONALL ADJACENT SIDES FROM ADJACENT CONTROL LOCATION NOT OTHERWISE SPECIFIED
TERMINAL LENGTH0.150 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us